Natural Gas Explosion and Fire in an Industrial Building

An investigation and analysis of an explosion which occurred in the attic space of a newly constructed industrial building was performed. The physical evidence indicated that the accident resulted from ignition of an accumulation of natural gas. The gas was being purged through a new gas line being attached to a gas heating furnace. Visual examination, interviews with plant personnel, review of accident reports, leak testing of the gas piping, and evaluation of ventilation requirements were included in APTECH's evaluation of this accident.

Our primary contacts for matters involving origin and cause of gas explosions can be reached at (408) 745-7000.
Name Email Specialty
Satish Almaula
email button Plant failure and root cause analysis; process and design engineering analysis; process technology development and testing; plant engineering, operations, maintenance and safety management; plant and process control system management.

Kimble Clark, Ph.D. email button Failure analysis, heat transfer & thermodynamics, process plant equipment failures & explosions, fuel science, combustion, industrial fires and explosions.

Richard Schreiber, P.E. email button Machinery and mechanical device failure analysis, mechanical testing, combustion and heat transfer, industrial fires and explosions, gas appliances.

Eric Sullivan, P.E. email button Metallurgy, welding, failure analysis, fire and explosion investigations, equipment, piping.

 
   


© 2008, APTECH Engineering Services, Inc. All rights reserved. Reproduction in whole or in part in any form without the express written permission of an officer of the company is strictly prohibited.

xyberMEDiA.com Web Site DesignWeb & graphics design by xyberMEDiA.com. Report problems to support@xybermedia.com AFG-V4.0 Site Requirements